Door leaf put on the roll prop stand & sweep the surface ensure it clean.

Spray lacker to door leaf

Plastering door leaf surface to plan. Polish it smooth after plastering dried.

After primer painting finish & dried, we use no. 660 sandpaper to polish and paint second time.

Polishing

After polish, we use a wind gun to blow out dust from door leaf surface.

Enter to painting room to spraying its first time. We use no. 1200 sandpaper to polish it smooth after dried. Repeat the step 3 times.

Put the painted door leaf inside kiln to kiln-dry for save dried-up time.

All painted products must be pass the quality control inspection before outgoing (besides photo shows inspector check the stair board smoothness & thickness.)